IMAP 函数
在线手册:中文 英文
PHP手册

imap_open

(PHP 4, PHP 5)

imap_openOpen an IMAP stream to a mailbox

说明

resource imap_open ( string $mailbox , string $username , string $password [, int $options = NIL [, int $n_retries = 0 [, array $params = NULL ]]] )

Opens an IMAP stream to a mailbox.

This function can also be used to open streams to POP3 and NNTP servers, but some functions and features are only available on IMAP servers.

参数

mailbox

A mailbox name consists of a server and a mailbox path on this server. The special name INBOX stands for the current users personal mailbox. Mailbox names that contain international characters besides those in the printable ASCII space have to be encoded width imap_utf7_encode().

The server part, which is enclosed in '{' and '}', consists of the servers name or ip address, an optional port (prefixed by ':'), and an optional protocol specification (prefixed by '/').

The server part is mandatory in all mailbox parameters.

All names which start with { are remote names, and are in the form "{" remote_system_name [":" port] [flags] "}" [mailbox_name] where:

  • remote_system_name - Internet domain name or bracketed IP address of server.
  • port - optional TCP port number, default is the default port for that service
  • flags - optional flags, see following table.
  • mailbox_name - remote mailbox name, default is INBOX

Optional flags for names
Flag Description
/service=service mailbox access service, default is "imap"
/user=user remote user name for login on the server
/authuser=user remote authentication user; if specified this is the user name whose password is used (e.g. administrator)
/anonymous remote access as anonymous user
/debug record protocol telemetry in application's debug log
/secure do not transmit a plaintext password over the network
/imap, /imap2, /imap2bis, /imap4, /imap4rev1 equivalent to /service=imap
/pop3 equivalent to /service=pop3
/nntp equivalent to /service=nntp
/norsh do not use rsh or ssh to establish a preauthenticated IMAP session
/ssl use the Secure Socket Layer to encrypt the session
/validate-cert validate certificates from TLS/SSL server (this is the default behavior)
/novalidate-cert do not validate certificates from TLS/SSL server, needed if server uses self-signed certificates
/tls force use of start-TLS to encrypt the session, and reject connection to servers that do not support it
/notls do not do start-TLS to encrypt the session, even with servers that support it
/readonly request read-only mailbox open (IMAP only; ignored on NNTP, and an error with SMTP and POP3)

username

The user name

password

The password associated with the username

options

The options are a bit mask with one or more of the following:

  • OP_READONLY - Open mailbox read-only
  • OP_ANONYMOUS - Don't use or update a .newsrc for news (NNTP only)
  • OP_HALFOPEN - For IMAP and NNTP names, open a connection but don't open a mailbox.
  • CL_EXPUNGE - Expunge mailbox automatically upon mailbox close (see also imap_delete() and imap_expunge())
  • OP_DEBUG - Debug protocol negotiations
  • OP_SHORTCACHE - Short (elt-only) caching
  • OP_SILENT - Don't pass up events (internal use)
  • OP_PROTOTYPE - Return driver prototype
  • OP_SECURE - Don't do non-secure authentication

n_retries

Number of maximum connect attempts

params

Connection parameters, the following (string) keys maybe used to set one or more connection parameters:

  • DISABLE_AUTHENTICATOR - Disable authentication properties

返回值

Returns an IMAP stream on success or FALSE on error.

更新日志

版本 说明
5.3.2 params added
5.2.0 n_retries added

范例

Example #1 Different use of imap_open()

<?php
// To connect to an IMAP server running on port 143 on the local machine,
// do the following:
$mbox imap_open("{localhost:143}INBOX""user_id""password");

// To connect to a POP3 server on port 110 on the local server, use:
$mbox imap_open ("{localhost:110/pop3}INBOX""user_id""password");

// To connect to an SSL IMAP or POP3 server, add /ssl after the protocol
// specification:
$mbox imap_open ("{localhost:993/imap/ssl}INBOX""user_id""password");

// To connect to an SSL IMAP or POP3 server with a self-signed certificate,
// add /ssl/novalidate-cert after the protocol specification:
$mbox imap_open ("{localhost:995/pop3/ssl/novalidate-cert}""user_id""password");

// To connect to an NNTP server on port 119 on the local server, use:
$nntp imap_open ("{localhost:119/nntp}comp.test""""");
// To connect to a remote server replace "localhost" with the name or the
// IP address of the server you want to connect to.
?>

Example #2 imap_open() example

<?php
$mbox 
imap_open("{imap.example.org:143}""username""password");

echo 
"<h1>Mailboxes</h1>\n";
$folders imap_listmailbox($mbox"{imap.example.org:143}""*");

if (
$folders == false) {
    echo 
"Call failed<br />\n";
} else {
    foreach (
$folders as $val) {
        echo 
$val "<br />\n";
    }
}

echo 
"<h1>Headers in INBOX</h1>\n";
$headers imap_headers($mbox);

if (
$headers == false) {
    echo 
"Call failed<br />\n";
} else {
    foreach (
$headers as $val) {
        echo 
$val "<br />\n";
    }
}

imap_close($mbox);
?>

参见


IMAP 函数
在线手册:中文 英文
PHP手册
PHP手册 - N: Open an IMAP stream to a mailbox

用户评论:

phpnote at cardiothink dot com (07-Feb-2012 10:50)

Thank you for this completely non-obvious tip, which solved the problem for me. To help search engines find this tip: the resulting error is "PHP Warning:  imap_open(): Couldn't open stream /home/your-directory/the-file-name in the-script-name on line XX"

If you include:  $str = imap_errors();  echo("imap_errors():\n");  print_r($str);
you will see:
  imap_errors():
  Array
  (
    [0] => Can't open mailbox /home/your-directory/the-file-name: no such mailbox
  )

phpnet at danepowell dot com (12-Dec-2011 04:20)

If you are accessing a local mailbox file, i.e. imap_open('/var/mail/www-data', '', ''), you may be restricted in what files you can access.

If PHP IMAP was compiled with the restrictBox option (which I believe most packages are these days), you can only access files relative to $HOME. Paths starting with '/' or '../' will be rejected.

Martin Eckardt (01-Jul-2011 02:41)

Since Version 5.3.2 there's a 6th parameter available to disable authentication with GSSAPI or NTLM:

Example:
<?php
$mbox
= imap_open("{w2010ExchangeServer:993/imap/ssl}", $user, $password, NULL, 1, array('DISABLE_AUTHENTICATOR' => 'GSSAPI'));
?>

This solves the problem with Exchange 2010 for me. As a reference see https://bugs.php.net/bug.php?id=33500

jeff1326 (13-Jun-2011 03:12)

If your connection is too slow, try it with port and without domain.

<?php
//Normal connection
$mailbox = imap_open("{SERVER}INBOX", $username, $password);

//Faster connection
$mailbox = imap_open("{SERVER:143}INBOX", $username, $password);

//Very slow connection
$mailbox = imap_open ("{SERVER.DOMAIN}INBOX", "DOMAIN/".$username, $password);
?>

david at brayworth dot com dot au (10-May-2011 01:28)

I managed to use this function against Exchange 2010 without recompiling to disable kerberos

It's important to me that php installs per the standard package (yum install php)

Exchange 2010 triggers kerberos in php, and you require the kinit thing (search around google for "imap_open kinit exchange 2010" and you will find this)

To get it working I had to:
1. setup the krb5.conf file correctly
2. do a kinit username@DOMAIN.DOM with a valid username / password
3. rename the ticket file to reflect the user id of apache (usually 48)
   /tmp/krb5cc_48
4. fix ownership
   chown apache.apache /tmp/krb5cc_48

but the exchange server will use the kerberos ticket and not the username password - unless you use ssl

<?php

    $imap_user
= "username";
   
$imap_pass = "password";
   
$imap_server = "{w2010kExchangeServer:993/novalidate-cert/ssl}";

   
$mbox = imap_open("{$imap_server}INBOX", $imap_user, $imap_pass);

   
$sorted_mbox = imap_sort($mbox, SORTDATE, 0);
   
$totalrows = imap_num_msg($mbox);
    print
"$imap_server\n";

   
$startvalue = 0;
    while (
$startvalue < $totalrows) {

       
$headers = imap_fetchheader($mbox, $sorted_mbox[ $startvalue ] );
       
$subject = array();
       
preg_match_all('/^Subject: (.*)/m', $headers, $subject);
        print
$subject[1][0] . "\n";

       
$startvalue++;
    }
?>
   
One small step for php / exchange, one Giant leap for David  ....

ph at hotmail dot fr (02-May-2011 09:05)

For those having issues with Gmail (my problem was : "too many login failures" on a webserver, but no problem on localhost..), instead of opening with :

$inbox = imap_open($hostname,$username,$password,NULL,1) or die('Cannot connect to Gmail: ' . imap_last_error());

Use :

$inbox = imap_open($hostname,$username,$password,NULL,1) or die('Cannot connect to Gmail: ' . print_r(imap_errors()));

You will be able to see the full list of errors that happened, and hopefully it will guide you to an answer.
In my case, Google wanted me to unlock my account by typing in a captcha. But this error wasn't clearly shown through imap_last_error().

Cheers,
PH

guilherme dot geronimo at gmail dot com (10-Nov-2010 01:23)

Using:
<?php
imap_open
( "{server.example.com:143}INBOX" , 'login' , 'password' );
?>

Got this error:
"Couldn't open stream {server.example.com:143}INBOX"

Solved by adding the flag "novalidate-cert":
<?php
imap_open
( "{server.example.com:143/novalidate-cert}INBOX" , 'login' , 'password' );
?>

=D

egoman69 at hotmail (07-Sep-2010 08:32)

"Couldn't open stream {127.0.0.1:143/imap/notls}INBOX"

Solved by only replacing 127.0.0.1 with localhost, php and IMAP server both in same machine, not through Proxy or anything. Weird!

Nohado (26-Aug-2010 07:34)

if u ever get something like this:

Notice: Unknown: IMAP protocol error: Invalid system flag in Store command (errflg=2) in Unknown on line 0

Notice: Unknown: Invalid system flag in Store command (errflg=2) in Unknown on line 0

This Error occurs if u want to set a flag 2 times. Just check ur manually flag Settings.

Cheers,
Nohado

anthony2009 at ns dot sympatico dot ca (25-Aug-2010 08:34)

<?php
// You can break out the variables for $mailserver, $port, $user and
// $pass without passing brackets into functions this way. Be sure to use
// the dots to append connection strings, ie "stuff". $variable ."STUFF"
// otherwise will go to imap_open with wrong variable type. :)

$mailserver="mail.example.com";
$port="110/pop3";
$user="aj";
$pass="remax01";
 
if (
$mbox=imap_open( "{" . $mailserver . ":" . $port . "}INBOX", $user, $pass ))
 {  echo
"Connected\n";
        
   
$check = imap_mailboxmsginfo($mbox);
         
    echo
"Date: "     . $check->Date    . "<br />\n" ;
    echo
"Driver: "   . $check->Driver  . "<br />\n" ;
    echo
"Unread: "   . $check->Unread  . "<br />\n" ;
    echo
"Size: "     . $check->Size    . "<br />\n" ;
        
   
imap_close($mbox);
 } else { exit (
"Can't connect: " . imap_last_error() ."\n");  echo "FAIL!\n";  };
?>

oz49erfan (03-Mar-2010 03:39)

Make sure your PHP is enabled with imap via the phpinfo() function

'--with-imap-dir=/opt/lampp' '--with-imap-ssl' '--with-imap=/opt/lampp'

and

IMAP c-Client Version 2007e
SSL Support Yes

I noticed that my apache script was working but my cli script was not. Turns out my php cli executable didn't have imap setup so I had to use another php cli executable.

kay at rrr dot de (31-Jan-2010 04:16)

imap_open is very simple to use, but struggles a litte bit on setups with ssl and tls.

this are tested examples for different hosts and protocols.

uncomment the host/protocol line and fill in correct username and password.

Kay

<?php

#######
# localhost pop3 with and without ssl
# $authhost="{localhost:995/pop3/ssl/novalidate-cert}";
# $authhost="{localhost:110/pop3/notls}";

# localhost imap with and without ssl
# $authhost="{localhost:993/imap/ssl/novalidate-cert}";
# $authhost="{localhost:143/imap/notls}";
# $user="localuser";

# localhost nntp with and without ssl
# you have to specify an existing group, control.cancel should exist
# $authhost="{localhost:563/nntp/ssl/novalidate-cert}control.cancel";
# $authhost="{localhost:119/nntp/notls}control.cancel";

######
# web.de pop3 without ssl
# $authhost="{pop3.web.de:110/pop3/notls}";
# $user="kay.marquardt@web.de";

#########
# goggle with pop3 or imap
# $authhost="{pop.gmail.com:995/pop3/ssl/novalidate-cert}";
# $authhost="{imap.gmail.com:993/imap/ssl/novalidate-cert}";
# $user="username@gmail.com";

$user="username like above";
$pass="yourpass";

if (
$mbox=imap_open( $authhost, $user, $pass ))
        {
         echo
"<h1>Connected</h1>\n";
        
imap_close($mbox);
        } else
        {
         echo
"<h1>FAIL!</h1>\n";
        }

?>

mightycpa (04-Jul-2009 06:45)

My script kept on timing out, even though the syntax was spot on... ultimately, I figured out that the port was blocked by my webhost, where I ran this on a shared server...

I post this just in case you miss this obvious, like I did.

bjtjong at home dot nl (09-Dec-2008 09:50)

To open an email message (*.eml) stored on disk you should add at the start of the message the following line:

From dummy@localhost  Sat Jan  1 00:00:00 1970

Then with imap_open("path/file.eml","","") you can process the email message as usal

Jason Pires (25-Apr-2008 06:56)

Dears.
In my case, e-mail host was the IMAP enabled.
So, just use the imap_open as the very simple form like:

$mailbox = "{mail.myhost.com:143/notls}INBOX";
$user = "me@myhost.com";
$pass = "mypassword";

$connection = imap_open($mailbox,$user,$pass) or die(imap_last_error()."<br>Connection Faliure!");

thanks!

Binit (11-Apr-2008 10:39)

I was trying imap_open() function but I was continuously getting this error:

Array ( [0] => [CLOSED] IMAP connection broken (server response) )

I was finally able to solve this problem (which is a very common problem as I saw it on the net but could not find any solution to it) so I'm posting my solution here which I hope will be useful to others.

I used stunnel program (http://www.stunnel.org/) and made changes in the stunnel.conf file as follows:

I added these lines:
[imapsClient]
accept = localhost:143
connect  = imapserver:993
client = yes
sslVersion = TLSv1

This will map insecure imap connection from localhost:143 to imapserver:993 (IMAP with SSL).

After this I tried this code and it worked fine:

<?php

$user
="";
$pass="";
$imap = @imap_open("{localhost:143}INBOX", $user, $pass);
?>

and I was able to do away with the errors.

A more detailed post about it can be found here:
http://www.phpfreaks.com/forums/index.php/topic,190628.0.html

itstooloud (31-Oct-2007 07:50)

Works with Gmail's new IMAP function for personal and for Google Apps.

$mbox = imap_open ("{imap.gmail.com:993/imap/ssl}INBOX", "username@gmail.com", "password")
     or die("can't connect: " . imap_last_error());

askalski at synacor dot com (27-Sep-2007 04:50)

By default, imap_open() will retry an incorrect password 3 times before giving up.  This is a feature built into the c-client library intended for interactive mail clients (which can prompt the end user for a new username/password combo.)

The new optional parameter "$n_retries" allows PHP to override the default retry limit.  There is absolutely no reason to leave this at default, or to set it to any value other than 1.  This is especially important if the mail server you're using locks users out after too many login failures.

bow+php dot net at virtual-habitat dot net (08-Sep-2007 04:06)

Setting a mailbox name (eg INBOX) at the end of the connection string does not work when using imap_open() with OP_HALFOPEN. You may use imap_reopen() then.

<?php

/* this will fail : */
$connection = imap_open('{mx.example.net}INBOX', 'foo', 'secret', OP_HALFOPEN.);
$num_mgs = imap_num_msg($connection);
imap_close($connection);

/* this will do : */
$connection = imap_open('{mx.example.net}INBOX', 'foo', 'secret', OP_HALFOPEN.);
imap_reopen($connection, '{mx.example.net}INBOX');
$num_mgs = imap_num_msg($connection);
imap_close($connection);

?>

gyokimae (11-May-2007 07:11)

Beginning with 5.2.2, binaries built for Windows also seem to have changed its default behavior.
'/notls' needs to be specified for a non-SSL connection.

Fladnag (27-Feb-2007 09:08)

you can avoid this message :

Warning: (null)(); Mailbox is empty (errflg=1) in Unknown on line 0

by specified the option OP_SILENT to imap_open.

Amit (11-Sep-2006 06:25)

None of the above comments explain the configuration issues on Apache/Windows combination. I thought it might be helpful to list my findings here so that Windows people's time is saved.

There is a bug in Windows php_imap.dll that prevents it from connecting it to the SSL IMAP/POP3 server.

http://bugs.php.net/bug.php?id=36496&edit=1

shaikh_zaid at yahoo dot com (04-Apr-2006 07:55)

imap_open will not open a stream if your server operates with Transport Layer Security (i.e. TLS) imap_open connects with SSL if its there. So try opening mailbox as

$mailbox="{mail.domain.com:143/imap/notls}";
or
$mailbox="{mail.domain.com:110/pop3/notls}"; This works...

Some mail server requires you to provide username@domain.com so you can always use. user@doamin.com

$conn=imap_open($mailbox, $username, $password);

Some server may ask for username as "user=user@domain.com"

:)

admin at sellchain dot com (09-Dec-2005 04:36)

Looking for a cool PHP Script to help you connect to a POP3 server, and download E-Mail to MySQL? Check out my neet-skeet script I wrote. Have fun.

Http://www.sellchain.com/phPOP3/phPOP3.txt

Download the above TXT file, and rename it to phPOP3.php.

Trust me, you will learn mostly everything about IMAP with this script.

By the way, be sure to use print_r($headers) to discover the headers that come with each message. You can setup your MySQL + Email Account information at the top of the script. No includes required!

Enjoyz;)

(03-Aug-2005 03:13)

WHen you use the /ssl connection...  half open doesnt work...!

what i did was opened it up with the .com:143/pop3}, op_halfopen

when i was getting my folders...

avizion at relay dot dk (12-May-2005 11:30)

For FreeBSD users...

If you want to have SSL support, you want to install the ports:

mail/php5-imap
security/php5-openssl

Cheers :)

 - avizion

m dot stoel at cyberkinetic dot nl (27-Apr-2005 06:50)

a little tip for those who get really frustrated even after reading all the right solutions and implementing them but still get the same errors or none at all..:
after having changed the code.. restart the httpd deamon..

for Fedora or any other Red Hat Linux OS (/etc/init.d/httpd restart).

After this you will be able to make a imap/pop3 stream from apache..

thushara dot perera at unilink dot lk (26-Feb-2005 05:19)

Warning: imap_open() [function.imap-open]: Couldn't open stream {xx.xx.x.xxx:143}INBOX

correct the connection string as :
{xx.xx.x.xxx:143/notls}INBOX

info at infosoporte.com (25-Feb-2005 02:14)

I can connect to my email server with no problem using regular usernames and passwords but.... in my server the usernames are long.. like name.surname1.surname2@subdomain.domain.com , and i get an error when the username size is over 40 chars:

$conn = imap_open("{". $server . ":110/pop3}", $username, $user_password) or die ("Failed with error: ".imap_last_error());

returns

Too many login failures

when the username is over 40 chars. Just remember that if you plan to use long usernames.

elizar.palad (14-Dec-2004 06:22)

thanks to the one who added that the login part should be the whole email address for it to work.. (assuming of course that all other stuff is good and working ;)

to add something, in the 'email address' login name, is not really the email address, ,it's the pop login name plus '@' plus the domain.. hope it's not confusing...

poploginname@domain.com

not

emailaddress@domain.com..

gasaunde at vcu dot edu (13-Dec-2004 07:35)

I've found that on my servers I _must_ use imap_errors() and imap_alerts() after an imap_open or this error is thrown in the logs when the mailbox is empty: [error] PHP Warning: (null)(); Mailbox is empty (errflg=1) in Unknown on line 0

cg at compile dot ch (20-Sep-2004 01:16)

If you use cyrus, passwords shadow via saslauth, check this:

> =====IMAPD.conf======
> configdirectory:        /var/imap
> partition-default:      /var/spool/imap
> sievedir:               /var/imap/sieve
> tls_cert_file:          /etc/cyrusimapd/server.crt
> tls_key_file:           /etc/cyrusimapd/server.key
> admins:                 cyrus
> hashimapspool:          yes
> allowanonymouslogin:    no
> allowplaintext:         yes
> unixhierarchysep:       0
> servername:             mail.garage.com
> sasl_pwcheck_method:    saslauthd
> mech_list: plain login

Make this

sasl_mech_list: plain login

liamr at umich dot edu (30-Jun-2004 12:40)

To authenticate using kerberos V / GSSAPI, you might need to add "user=" to the connection string.. eg:

$mbox = imap_open( "\{imap.example.com:143/imap/notls/user=" . $user . "}INBOX", $user, $passwd );

Our IMAP servers won't allow a user other than the user specified in the kerberos credentials connect using those credentials unless you specify that extra "user=" in the connection string.  Passing it as an argument to imap_open() doesn't seem to be enough.

nmmm at nmmm dot nu (22-Jun-2004 06:37)

To open local mailbox ( mbox ) enter its absolute file name.

>an absolute filename
>This specifies a mailbox in the default format (usually >Berkeley format for most default library builds)

source:
http://aspn.activestate.com/ASPN/CodeDoc/Mail-Cclient/Cclient.html

rvarkelen AT hortimax.nl (14-Jan-2004 11:03)

In order to make a IMAP connection to a Microsoft Exchange Server 5.5, I used this connection-string :

<?php
if(imap_open ("{192.168.1.6:143/imap}Inbox", "DOMAIN/USERNAME/ALIAS", "PASSWORD"))
{
    echo
'Connection success!';
}
else
{
    echo
'Connection failed';
}
?>

By replacing "Inbox" with, e.g. "Tasks", its possible to see all your tasks. I Hope this helps anybody!

Regards

marshall /AT\ pacdemon.org (03-Nov-2003 07:50)

Thanks for all your comments.  The user comments have saved me countless times.

I'd like to give back in my small way by providing this little tip.  To test your pop or imap services you can use telnet (almost all operating systems should come with a command line telnet client).

Here's the pop3 example (the lines that start with + are the server's response):

    telnet your.pop.host.com 110
    +OK POP3 your.pop.host.com v2001.78 server ready
    user your_username
    +OK User name accepted, password please
    pass your_password
    +OK Mailbox open, 23 messages

Note that your pop server may be on some other port than 110 but that is the default/standard.

Here's the imap example (Lines that have OK near the begining are server responses):

    telnet your.imap.host.com 143
    * OK [CAPABILITY IMAP4REV1...]
    1 LOGIN "your_username" "your_password"
    1 OK [CAPABILITY...] ... User your_username authenticated

This might be old news to some people but I hope it's helpful for many.

marshall /at/ sprux net (19-Aug-2003 12:44)

I only run imap on port 993 (ssl only) and I was unable to use imap_open().. couldn't even get an error out of the script, it just sat there and timed out with no messages in the logs or anything--the page wouldn't load.

Anyway, this is what finally worked, which I found in the readme for a popular opensource webmail system:

$i = @imap_open("{localhost:993/ssl/novalidate-cert}INBOX", $user, $pw);

I didn't see the 'ssl' option mentioned anywhere in these comments so maybe this will help someone out.

Kyle Putnam (15-Jun-2003 12:52)

I was getting bizzare errors that I couldn't find documentation about anywhere on Google. I tried connecting to another server and got different, but just as unusual error messages. I even checked the POP3 server logs and it said something about invalid command... I figured it was another libc problem.

Stupidly enough, the problem was that I was using an unset variable for the password! Make sure you don't have an empty username or password... you'll have a hard time debugging the problem ;)

stefan dot greifeneder at dioezese-linz dot at (09-May-2003 02:10)

Had problems to use imap_open with iMail 6.06 Server. My problem was (sounds stupid): Didn't realise that the username had to be the full email address and not just the login. Maybe this helps some people.

bill dot mccoy at pictureiq dot com (24-Apr-2003 03:29)

"notls" seems to be required for PHP on RedHat 8.0, but it seems that "/norsh" is also advisable; without it, the client library will attempt an RSH connection and wait for this to timeout before reverting to normal IMAP. This was causing a 15 second delay in imap_open for me. Looking at the client lib C code this will likely be an issue on other platforms as well as they update to the newer version. You can use both "/notls" and "/norsh", e.g. the first parameter to imap_open can be something like: "{your.imap.host/imap/notls/norsh}".

kaper at nexgc dot com (08-Apr-2003 05:17)

I had been having lots of trouble trying to get imap_open to connect to an imap server.  Then I found another post online that suggested this and it worked, so I am going to post it here.  I hope this helps others..

"I have tried with the following strings instead and it works:

for pop3: {www.server.com:110/pop3/notls}INBOX

and for imap: {www.server.com:143/notls}INBOX.

xore at hotmail dot com (02-Apr-2003 12:37)

pop3 seems to like refusing connection if you have OP_READONLY set

testers: be forewarned :P

madsiuk at morellos dot net (27-Feb-2003 03:35)

hi
  Note for all having problems to connect hosts using imap_open:

  I spent almost week trying to fix my script which was connecting to localhost but was unable to connect any other host. Sollution was actually wery simple but I'm writing that note becouse there are some posts at usenet or forums decribing similiar problems. And actually I haven't found any  answer for that. So for all of you trying to connect to hosts with imap_open CHECK IF THERE IS NO FIREWALL BLOCKING POP3.

madsiuk

russell at flora dot ca (08-Jan-2003 11:07)

Note about "PHP Warning:  Certificate failure"

I'm not sure if this is a RedHat, PHP, or IMAP library issue, but the default for SSL seems to have changed.

You now need to specify "/notls" when you don't want TLS, rather than only needing to specify "/ssl" when you do.

Example: 

"{localhost:143}INBOX"

becomes:

"{localhost:143/notls}INBOX"

jpdalbec at ccNO dot ysuSPAM dot edu (17-Jun-2002 07:27)

I ran into the
PHP Warning:  Certificate failure for <server>: self signed certificate:
message while upgrading 4.0.6->4.1.2.  I'm pleased to report that {<server>:<port>/imap/tls/novalidate-cert}<mailbox>
works as expected (and fixes my problem).  I'm using IMP 2.2.8.

fxbois at free dot fr (05-Jun-2002 07:07)

Hi,
I just want to say to all redhat people who have problem (Couldn't open stream) with the connection on the local pop server to use this :
{127.0.0.1:110/pop3/notls}INBOX
hope this help

frederik at roal dot no (17-Apr-2002 05:02)

For all imap functions where you specify the mailbox string it is important that you ALWAYS use IP (not hostname) and the portnumber. If you do not do this imap functions will be painfully slow.
Using hostname instead of IP adds 3 seconds to each IMAP call, not using portnumber adds 10 seconds to each imap call. (hint: use gethostbyname() )

brojann at netscape dot com (30-Oct-2001 10:01)

You can do

<? $foo = imap_errors(); ?>

to clear unwanted warning messages like 'Mailbox is empty'

jdg11 at po dot cwru dot edu (13-Aug-2001 11:41)

It would be nice to mention that this function does send headers. It makes sense, but it is not obvious. It took me a while to figure it out. I authenticate against a POP3 server, and set a cookie if the authentication validates. At least I wanted to :) But since it sends a header to the server, setcookie() won't work.

curtis at lamere dot net (27-Jun-2001 12:16)

I have found that the syntax for the imap_open command in PHP 4 differs whether you're passing a variable to the imap_open function or declaring the host directly within the function.  If you are passing variables to the imap_open function, the syntax should look like:

$username = "user";
$password = "password";
$mailserver = "mail.somedomina.com:110/imap";

$link = imap_open("\{$mailserver}INBOX",$username,$password);

If you don't include the leading backslash (\) you will not open the stream.  Likewise you cannot pass the curly braces to the function.

If you define the server directly, omit the leading backslash.

$username = "user";
$password = "password";

$link = imap_open("{mail.somedomain.com:110/pop3}",$username,$password)"

I discovered all of this after 3 days of trying to get all of this work on redhat 7.1.

(23-May-2001 06:23)

A better way to connect to a mail server would be to use uri syntax, for example:

imap://username:password@server.com:143/INBOX/message/part

this is very easy to parse using 'parse_url()'

Remember to keep your username and password hidden if your over an open network

fferreres at joydivision dot com dot ar (29-Mar-2001 03:12)

IMAP, POP and NNTP are ok. But plaintext mailboxes are unmentioned here. You just forget the {part} and go for the file (tested on unix):

$mbox = imap_open ($a_mail_box_file_name_in_home_dir, "", "") || die("Snif...:
".imap_last_error());

kvance at n-link dot net (09-Mar-2001 09:34)

Connections to the IMAP server work without specifying the port number, but they are slow, so specifying the port number is important if you don't want a slow application.

bandpay at hotmail dot com (04-Dec-2000 08:59)

I have a single comment to add about imap_open.
If you want to connect to a news server, without specifying any news gruop, you can use the following:

<?php
$server
= "{news.servername.com/nntp:119}";
$nntp = imap_open($server,"","",OP_HALFOPEN);
?>

and $nntp will become the connection ID.

Regards
//Babak